Universal 4-Button Remote Control for Electric Garage Doors and Gates (Lock Type 433MHz)

⚡ Smart Copy Duplicator 433MHz Remote Control is an advanced solution designed for seamlessly cloning various garage door and gate remote controls. This versatile device supports a wide frequency range of 315MHz, 330MHz, and 433.92MHz, making it an essential tool for users seeking efficiency and convenience in managing their access points.

🧰 This remote control duplicator boasts compatibility with a comprehensive array of chipsets, including:

• Fixed code and learning code
• 2260 (compatible with all manufacturers)
• 2262 (compatible with all manufacturers)
• PT2264, 5326 (compatible with all manufacturers)
• SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014 (compatible with all manufacturers)
• SMC918 Series, 527 (compatible with all manufacturers)
• 1527 (compatible with all manufacturers)
• 2240 (compatible with all manufacturers)

⚡ In terms of brand compatibility for 433MHz rolling code systems, the Smart Copy Duplicator supports a variety of well-known brands:

• BFT MITTO2, MITTO4 (old version)
• BENINCA TO GO WV
• DOORHAN TX4
• NICE FLORS
• NOVOFERM
• FAAC XT4 433RC
• KEY TXB-42R
• ATA PTX4
• GBD AU1600
• Nice-Smilo
• ROSSI
• MotorLine MX4SP DSM
• DEA MIO TR2
• Peccinin TX3C
• Centurion NOVA
• AN MOTOR AT-4
• FADINI JUBI
• Hiland

👌 This duplicator allows for easy copying of both fixed and rolling codes. For fixed code and learning code remote controls, users can simply duplicate without additional setup. However, for rolling code brands, a programming step is required, as detailed in the original manual, post-duplication.

How to Copy:

🔍 Memory Clearance:

1. Press buttons 1 and 2 simultaneously until the LED flashes three times.
2. Release button 2 (keeping button 1 pressed), and then press button 2 slowly three times until the LED flashes quickly.
3. Release both buttons; the duplicator is now ready for copying.

🔘 Duplicating Process:

For effective duplication, place the duplicator next to the original transmitter as closely as possible.

For Fixed Code Remote Control:

1. Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until the LED flashes, indicating successful duplication.
2. Repeat this for the remaining buttons; the duplicator will be fully functional after cloning.

🔘 For Rolling Code Remote Control:

1. Press and hold button 1 of the original transmitter, then press and hold button 1 of the duplicator until the LED flashes.
2. Once one button is duplicated, the remaining buttons will generate automatically. Please consult the original receiver’s manual to program the new duplicator into the system.

🔘 If you accidentally erase the code, simply press and hold both the "3" and "4" buttons on the remote controls simultaneously. After ten seconds, the LED will flash twice and turn off, indicating the code has been restored.

🤖 With its user-friendly design and extensive compatibility, the Smart Copy Duplicator is an invaluable tool for anyone looking to simplify their access control system.